Qos Engine - D-Link AC750 User Manual

Section 3 - Configuration
The QoS Engine option helps improve your network performance by prioritizing applications. By default the QoS En-
gine settings are disabled and application priority is not classified automatically. The QoS section contains a queuing
mechanism, traffic shaping, and classification. It supports two kinds of queuing mechanisms: Strict Priority Queue (SPQ)
and Weighted Fair Queue (WFQ). SPQ will process traffic based on traffic priority. Queue1 has the highest priority and
Queue4 has the lowest priority. WFQ will process traffic based on the queue weight. Users can configure each queue's
weight. The sum of all the queue's weights must be 100. When surfing the Internet, the system will do traffic shaping
based on the uplink and downlink speed. The classification rules can be used to classify traffic to different queues, then
SPQ or WFQ will do QoS based on the queue's priority or weight.
The following parameters will be available for configuration:
Enable QoS: This option is disabled by default. Enable this option
for better performance and experience with online
games and other interactive applications, such as VoIP.
Uplink Speed: The speed at which data can be transferred from the
router to your ISP. This is determined by your ISP. ISP's
often define speed as a download/upload pair. For
example, 1.5Mbits/284Kbits. Using this example, you
would enter 284. Alternatively you can test your up-
link speed with a service such as www.dslreports.com.
Downlink The speed at which data can be transferred from the
Speed: ISP to the router. This is determined by your ISP. ISP's
often define speed as a download/upload pair. For
example, 1.5Mbits/284Kbits.
Using this example, you would enter 1500. Alterna-
tively you can test your downlink speed with a service
such as www.dslreports.com.
D-Link DIR-810L User Manual

QoS Engine

80