D-Link AC750 User Manual page 30

Step.3:.Internet.Connection.(L2TP)
After selecting the L2TP Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
Address.Mode: Here the user can specify whether this
L2TP.IP.Address: Enter the L2TP IP address used here. This
L2TP.Subnet.Mask: Enter the L2TP Subnet Mask used here.
L2TP.Gateway.IP.Address: Enter the L2TP Gateway IP address used
L2TP.Server.IP.Address: Enter the L2TP Server IP address used
User.Name: Enter the L2TP username used here.
Password: Enter the L2TP password used here.
Verify.Password: Re-enter the L2TP password used here.
Click Next.to continue.
D-Link DIR-810L User Manual
Internet connection requires the use of a
Dynamic or Static IP address. L2TP usual
requires a Dynamic IP configuration.
option is only available if Static IP is se-
lected.
here.
here. This is normally the same a the L2TP
Gateway IP address.
26