Manual Setup - 2.4Ghz Band - D-Link AC750 User Manual

The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being config-
Enable Wireless: Check the box to enable the wireless func-
Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The
802.11 Mode: Here the user can manually select the preferred wireless standard to use for this wireless network. You should
Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the wireless channel with the
Wireless Channel: If Auto Channel Scan had been disabled, you can select your preferred wireless channel. By default the channel is
Transmission Rate: Select the transmission rate. It is strongly suggested that Best (Automatic) is selected for best performance.
Channel Width: When using the 802.11n frequency band, users have an option to choose between a 20MHz or 20/40MHz band-
Visibility Status: This option allows you to adjust the visibility of your SSID. If Visible is selected, the SSID of your wireless network
D-Link DIR-810L User Manual

Manual Setup - 2.4Ghz Band

ured. The following configuration relates
to the 2.4GHz band.
tion at all times. If you do not want to use
wireless, uncheck the box to disable all
wireless functions. To set a schedule for
the times when you want the wireless net-
work to be available, click on the Add New
button to specify a new schedule.
SSID is case-sensitive.
select the 802.11 mode according to the capabilities of the wireless clients/devices which will be accessing this net-
work. If only 802.11n devices will be accessing your network, it is recommended to set the 802.11 mode to 802.11n
only.
least amount of interference.
set to 1. The channel can be changed to fit the channel setting for an existing wireless network or to customize the
wireless network.
width.
will be visible to any wireless clients within range of the signal. If Invisible mode is selected, clients must search for
the SSID of your wireless network manually in order to connect to the network.
43