Sleep Timer - Oregon Scientific RM939P User Manual

See the table below for alarm icons:
ICON MEANING
Melody alarm is set. (There are 5 melodies
and 1 beep alarm to choose from)
Vibration alarm is set
Melody and vibration alarms are set
No
No alarm is set
icons
To set the alarm:
1. Press and hold CLOCK ALARM for 2 seconds.
2. Use and to toggle between alarm 1 and 2.
3. Press CLOCK ALARM to select alarm 1 or 2.
4. Press or to change the hour setting.
5. Press CLOCK ALARM to confirm the hour setting
and move to the next setting.
6. The settings appear in the following order: hour,
minute, alarm type, alarm sound and alarm volume
(if melody alarm has been selected).
Press CLOCK ALARM at any time to exit Alarm
setting mode.
To toggle alarm 1 and alarm 2 ON / OFF:
• Press CLOCK ALARM.
RM939P_M_EN_R1 5
To silence the alarm:
• Press SNOOZE / LIGHT to silence it for 8 minutes
OR
• Press any key except SNOOZE / LIGHT to turn the
alarm off and activate it again after 24 hours.
If no button is pressed the alarm will automatically
silence after 2 minutes and sound again after 24 hours.

SLEEP TIMER

There is a choice of 6 soothing sounds to play while you
fall asleep:
• Bird
• Wind
• River
To turn the sleep timer ON:
1. Press SOUND / SLEEP once to activate the last
setting used.
2. Press SOUND / SLEEP to set soothing sound duration
(120, 90, 60, 30, 15 or 0 minutes).
3. Press or to change the soothing sound
volume.
SOUND will flash on the LCD display to indicate
that the sleep timer is activated.
5
2006.3.16, 5:25 PM
• Raindrop
• Waterfall
• Ocean Wave