Bios Features Etup; Bios F Eatures S Etup; F Igure 3: Bios F Eatures S Etup - Gigabyte 6VX7-4X User Manual

6VX7-4X
BIOS Features Setup
AMIBIOS SETUP – BIOS FEATURES CMOS SETUP
( C ) 1998 American Megatrends, Inc. All Rights Reserved
Quick Boot
1st Boot Device
2nd Boot Device
3rd Boot Device
Try Other Boot Device
Floppy Access Control
Hard Disk Access Control
S.M.A.R.T for Hard Disks
BootUp Num-Lock
Floppy Drive Swap
Floppy Drive Seek
Password Check
Boot To OS/2 > 64MB
CPU Serial Number
L1/L2 Cache
Cache Bus ECC
System BIOS Cacheable
C000, 32K Shadow
C800, 16K Shadow
CC00, 16K Shadow
Quick Boot
Enabled Enabled Quick Boot Function. (Default Value)
Disabled Disabled Quick Boot Function.
1st / 2nd / 3rd Boot Device
The default value is Floppy or LS-120 / ZIP A: or ATAPI ZIP C: or CDROM or SCSI or NET WORK / I20 or
IDE-0~IDE-3 or Disabled.
Floppy Boot Device by Floppy.
LS-120 / ZIP A: Boot Device by LS-120 / ZIP A:.
CDROM Boot Device by CDROM.
SCSI Boot Device by SCSI.
NETWORK Boot Device by NETWORK.
IDE-0~IDE-3 Boot Device by IDE-0~IDE-3.
Disabled Boot Device by Disabled.
ATAPI ZIP C: Boot Device by ATAPI ZIP C:.
Try Other Boot Device
Yes Enabled other device to boot system. (Default Value)
No Disabled other device to boot system.
Floppy Access Control
Read-Write Set Floppy Access Control : Read-Write. (Default
Value)
Read-Only Set Floppy Access Control : Read Only.
Hard Disk Access Control
Read-Write Set Hard Disk Access Control : Read-Write. (Default
Value)
Read-Only Set Hard Disk Access Control : Read Only.
S.M.A.R.T. for Hard Disks
Enable Enable S.M.A.R.T. Hard for Disks.
Disable Disable S.M.A.R.T. Hard for Disks. (Default Value)
:Enabled D000, 16K Shadow
:Floppy D400, 16K Shadow
:IDE-0 D800, 16K Shadow
:CDROM DC00, 16K Shadow
:Yes
:Read-Write
:Read-Write
:Disabled
:On
:Disabled
:Disabled
:Setup
:No
:Disabled
:WriteBack
:Disabled ESC : Quit
:Enabled F1 : Help
:Cached F5 : Old Values
:Disabled F6 : Load BIOS Defaults
:Disabled F7 : Load Setup Defaults
Figure 3: BIOS Features Setup
:Disabled
:Disabled
:Disabled
:Disabled
: Select Item
PU/PD/+/- : Modify
(Shift)F2 :Color
28