Gigabyte 6VM7-4I User Manual
Gigabyte 6VM7-4I User Manual

Gigabyte 6VM7-4I User Manual

Socket 370 processor motherboard
Hide thumbs Also See for 6VM7-4I:

Advertisement

Quick Links

DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854- 9338/ (818) 854-9339
hereby declare s that the product
Product Name:
Mother Board
Model Number:
GA - 6VM7 - 4I
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
E r i c L u
Signature:
Date:
Feb. 11, 2000
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential
installations.
generates,
uses,
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
This
equipment
and
can
radiate
radio

Advertisement

Table of Contents
loading

Summary of Contents for Gigabyte 6VM7-4I

  • Page 1 FCC Compliance Statement: This equipment has been tested and found to DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) comply with limits for a Class B digital device , pursuant to Part 15 of the FCC rules. These Responsible Party Name: G.B.T.
  • Page 2: Declaration Of Conformity

    Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-6VM7-4I is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive...
  • Page 3 6VM7-4I Socket 370 Processor Motherboard USER'S MANUAL Socket 370 Processor Motherboard REV. 1.0 Third Edition R-10-03-000801...
  • Page 5 How This Manual Is Organized This manual is divided into the following sections: Manual revision information 1) Revision History Product item list 2) Item Checklist Product information & specification 3) Features Instructions on setting up the motherboard 4) Hardware Setup Product performance &...
  • Page 7: Table Of Contents

    Table Of Content Revision History Item Checklist Summary of Features 6VM7-4I Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Definition Performance List P.32 Block Diagram P.33 Suspend to RAM Installation P.34 Memory Installation P.40 Page Index for BIOS Setup P.41...
  • Page 8: Revision History

    6VM7-4I Motherboard Revision History Revision Revision Note Date Initial release of the 6VM7-4I motherboard user’s Jan.2000 manual. Second release of the 6VM7-4I motherboard user’s Mar.2000 manual. Third release of the 6VM7-4I motherboard user’s Aug.2000 manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein.
  • Page 9: Item Checklist

    Item Checklist Item Checklist þThe 6VM7-4I motherboard þCable for IDE / floppy device þDiskettes or CD (TUCD) for motherboard driver & utility þ6VM7-4I user’s manual...
  • Page 10: Summary Of Features

    6VM7-4I Motherboard Summary Of Features 24.3 cm x 21.0 cm micro ATX size form factor, 4 layers Ÿ Form Factor PCB. Socket 370 processor Ÿ Intel Pentium ® !!! 100/133MHz FSB, FC-PGA Intel Celeron TM 66MHz FSB, PPGA,FC-PGA VIA Cyrix ® III 100/133 MHz FSB,PPGA 2nd cache in CPU(Depend on CPU) Ÿ...
  • Page 11 Summary of Features BIOS Licensed AMI BIOS, 2M bit flash ROM Ÿ ® ® PS/2 Connector PS/2 Keyboard interface and PS/2 Mouse interface Ÿ On-Board Sound Build in VIA 82C686A Ÿ Additional Features Includes 3 fan power connectors. Ÿ Poly fuse for keyboard over-current protection Ÿ...
  • Page 12: 6Vm7-4I Motherboard Layout

    6VM7-4I Motherboard 6VM7-4I Motherboard Layout PS/2 LED1 JP19 JP16 PGA 370 JP15 VT82C 694X 6VM7-4I BAT1 AGP 1 JP23 JP26 PCI1 PCI2 JP11 VT82C BIOS 686A JP18 JP22 ISA1...
  • Page 13 6VM7-4I Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Page Definition CPU Speed Setup Connectors P.17 Game & Audio Port P.17 COM A / COM B / LPT Port P.17 USB 1 Connector P.18 PS/2 Keyboard &...
  • Page 14: Cpu Speed Setup

    6VM7-4I Motherboard CPU Speed Setup The system bus speed is selectable at 66,100,133MHz and Auto. The user can select the system bus speed (SW1) and change the DIP switch (SW2) selection to set up the CPU speed for 300MHz –1GHz and faster processor.
  • Page 15 CPU Speed Setup M Intel Processor all have locked Frequency Multiple, so you can not change the CPU Frequency Multiple. F For Auto Jumper Setting: « Note: 1. If you use 66/100/133 MHz CPU, We recommend you to setup your system speed to “Auto”...
  • Page 16 6VM7-4I Motherboard Celeron 333/ 66 MHz FSB Celeron 366/ 66 MHz FSB Celeron 400/ 66 MHz FSB 5. Celeron 433/ 66 MHz FSB...
  • Page 17 CPU Speed Setup 6. Celeron 466/ 66 MHz FSB 7. Celeron 500/ 66 MHz FSB 8. Celeron 533/ 66 MHz FSB 9. Celeron 566/ 66 MHz FSB...
  • Page 18 6VM7-4I Motherboard 10. Celeron 600/ 66 MHz FSB 11. Celeron 633/ 66 MHz FSB 12. Celeron 667/ 66 MHz FSB 13. Celeron 700/ 66 MHz FSB...
  • Page 19 CPU Speed Setup 14. Cryix III 550/100MHz FSB 15. Cryix III 533/133MHz FSB 16. Cryix III 600/133MHz FSB 17. Pentium !!! 500/100MHz FSB ®...
  • Page 20 6VM7-4I Motherboard !!! 550/100MHz FSB 18. Pentium ® 19. Pentium !!! 600/100MHz FSB ® 20. Pentium !!! 650/100MHz FSB ® 21. Pentium !!! 700/100MHz FSB ®...
  • Page 21 CPU Speed Setup !!! 750/100MHz FSB 22. Pentium ® 23. Pentium !!! 800/100MHz FSB ® 24. Pentium !!! 850/100MHz FSB ® 25. Pentium !!! 533/133MHz FSB ®...
  • Page 22 6VM7-4I Motherboard 26. Pentium !!! 600/133 MHz FSB ® 27. Pentium !!! 667/133MHz FSB ® 28. Pentium !!! 733/133MHz FSB ® 29. Pentium !!! 800/133MHz FSB ®...
  • Page 23 CPU Speed Setup 30. Pentium !!! 866/133MHz FSB ® 31. Pentium !!! 933/133MHz FSB ® 32. Pentium !!! 1GHz/133MHz FSB ®...
  • Page 24: Connectors

    6VM7-4I Motherboard Connectors Game & Audio Port Game Port Line Out Line In COM A / COM B / LPT Port LPT Port COM B COM A...
  • Page 25: Usb 1 Connector

    Connectors USB 1 Connector Pin No. Definition USB V0 USB D0- USB D0+ USB V1 USB D1- USB D1+ 5 6 7 8 PS/2 Keyboard & PS/2 Mouse Connector PS/2 Mouse PS/2 Keyboard PS/2 Mouse/ Keyboard Pin No. Definition Data VCC(+5V) Clock...
  • Page 26: Usb 2 Connector

    6VM7-4I Motherboard USB 2 Connector Pin No. Definition USB D0- USB D0+ USB D1- USB D1+ JP16 : CPU Fan Pin No. Definition +12V SENSE...
  • Page 27: Jp15 (Power Fan)

    Connectors JP15 : Power Fan Pin No. Definition +12V JP2 : Sysem Fan Pin No. Definition +12V SENSE...
  • Page 28: Atx Power

    6VM7-4I Motherboard ATX Power Pin No. Definition 3,5,7,13, 11 1 15-17 1,2,11 3.3V 4,6,19,20 +12V -12V Power Good 20 10 5V SB stand by+5V PS-ON(Soft On/Off) Floppy Port Red Line FDD1...
  • Page 29: Ide1(Primary), Ide2(Secondary) Port

    Connectors IDE1(Primary), IDE2(Secondary) Port Red Line IDE 1 IDE 2 J7 : TEL: The connector is for Modem with internal voice connector Pin No. Definition Signal-In Signal-Out...
  • Page 30: J5 (Aux_In)

    6VM7-4I Motherboard J5 : AUX_IN Pin No. Definition AUX-L AUX-R J8 : CD Audio Line In Pin No. Definition CD-L CD-R...
  • Page 31: J13 (Ir)

    Connectors J13 : IR Pin No. Definition VCC (+5V) IR Data Input IR Data Output J3 : Ring Power On (Internal Modem Card Wake Up) Pin No. Definition Signal...
  • Page 32: J1 (Wake On Lan)

    6VM7-4I Motherboard J1 : Wake On LAN Pin No. Definition +5V SB Signal JP3 : Audio Out Pin No. Definition Line Out (R) Line Out (L) Analog GND Digital GND +12V...
  • Page 33: Definition

    Connectors JP26 : CD_IN Pin No. Definition CD_IN Left CD Ground Ground CD_IN Right JP5 / LED1: STR LED Connector & DIMM LED STR LED Connector External. DIMM LED...
  • Page 34: Panel And Jumper Definition

    6VM7-4I Motherboard Panel and Jumper Definition J2 : 2x11 Pins Jumper GN (Green Switch) Open: Normal Operation Close: Entering Green Mode GD (Green LED) Pin 1: LED anode(+) Pin 2: LED cathode(−) HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(−)
  • Page 35: Jp1 (Clear Cmos Function)

    Panel and Jumper Definition JP1 : Clear CMOS Function Pin No. Definition 1-2 Close Normal (Default) 2-3 Close Clear CMOS JP23 : Case Open Pin No. Definition Signal...
  • Page 36: Jp19 (Support Cyrix Cpu Selection)[Optional]

    6VM7-4I Motherboard JP19 : Support Cyrix CPU Selection(Optional) Pin No. Definition Open Normal Close Support Cyrix 133MHz JP7/JP8/JP18 : Onboard AC97& AMR (Primary or Secondary ) Select (AMRà Audio Modem Riser) JP18 Jumper JP18 Function Only AC97 1-2 Close Open...
  • Page 37: Jp9 (Usb Device Wake Up Selection)

    Panel and Jumper Definition JP9 : USB Device Wake up Selection Pin No. Definition 1-2 Close Normal (Default) 2-3 Close USB Device Wake up (If you want to use “USB KB Wakeup From S3-S5” function, you have to set the BIOS setting “USB KB Wakeup From S3-S5”...
  • Page 38: Jp11 (Str Function Enabled)

    6VM7-4I Motherboard JP11 : STR Function Enabled Pin No. Definition Open STR Disabled (Default) Close STR Enabled BAT1 : Battery Danger of explosion if battery is incorrectly replaced. + Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 39: Performance List

    Performance List Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) •...
  • Page 41: Block Diagram

    6VM7-4I Motherboard Block Diagram 14.318MHz 3.3V DIMM PGA 370 CPU AGP 2X/4X DIMM Sockets Host Bus AGP Bus VT82C694X Ultra DMA 33/ATA66 IDE Ports 33 MHz 9248DF-39 PCI Bus 33 MHz 24MHz 48MHz ISA Bus 14.318MHz VT82C686A IDE Bus COM Ports AC’97-Link...
  • Page 43: Suspend To Ram Installation

    Suspend to RAM Installation Suspend To RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “state” of the system before it went to sleep and recover to that state.
  • Page 44 6VM7-4I Motherboard Step 2: (If you want to use STR Function, please set jumper JP11 Closed.) Pin No. Definition Open STR Disabled Close STR Enabled Step 3: Power on the computer and as soon as memory counting starts, press <Del>. You will enter BIOS Setup.
  • Page 45 Suspend to RAM Installation A.3 How to put your system into STR mode? There are two ways to accomplish this: Choose the “Stand by” item in the “Shut Down Windows” area. A. Press the “Start” button and then select “Shut Down” B.
  • Page 46 6VM7-4I Motherboard Define the system ”power on” button to initiate STR sleep mode: A. Double click “My Computer” and then “Control Panel” B. Double click the “ Power Management” item.
  • Page 47 Suspend to RAM Installation C. Select the “Advanced” tab and “Standby” mode in Power Buttons. Step 4: Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “Power on” button.. A.4 How to recover from the STR sleep mode? There are five ways to “wake up”...
  • Page 48 6VM7-4I Motherboard A.5 Notices : In order for STR to function properly, several hardware and software requirements must be satisfied: Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). Your SDRAM must be PC-100 compliant.
  • Page 49: Memory Installation

    Memory Installation Memory Installation The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.
  • Page 50: Page Index For Bios Setup

    6VM7-4I Motherboard $ Page Index for BIOS Setup Page The Main Menu P.43 Standard CMOS Setup P.45 BIOS Features Setup P.48 Chipset Features Setup P.50 Power Management Setup P.53 PNP/ PCI Configuration P.56 Load BIOS Defaults P.58 Load Setup Defaults P.59...
  • Page 51: Entering Setup

    BIOS Setup BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Power ON the computer and press <Del>...
  • Page 52: Getting Help

    6VM7-4I Motherboard GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 53 BIOS Setup • Chipset Features Setup This setup page includes all the items of chipset special features. • Power Management Setup This setup page includes all the items of Green function features. • PnP/PCI Configurations This setup page includes all the configurations of PCI & PnP ISA resources. •...
  • Page 54: Standard Cmos Setup

    6VM7-4I Motherboard Standard CMOS Setup The items in Standard CMOS Features Menu (Figure 2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
  • Page 55 BIOS Setup • Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. • IDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer.
  • Page 56: Boot Sector Virus Protection

    6VM7-4I Motherboard • Boot Sector Virus Protection If it is set to enable, the category will flash on the screen when there is any attempt to write to t h e boot sector or partition table of the hard disk drive. The system will halt and the following error message will appear in the mean time.
  • Page 57: Bios Features Setup

    BIOS Setup BIOS Features Setup AMIBIOS SETUP – BIOS FEATURES CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved 1st Boot Device :Floppy 2nd Boot Device :IDE-0 3rd Boot Device :CDROM S.M.A.R.T for Hard Disks :Disabled BootUp Num -Lock Floppy Drive Seek :Disabled Password Check...
  • Page 58 6VM7-4I Motherboard • S.M.A.R.T. for Hard Disks Enable Enable S.M.A.R.T. Hard for Disks. Disable Disable S.M.A.R.T. Hard for Disks. (Default Value) • Boot Up Num-Lock Keypad is number keys. (Default Value) Keypad is arrow keys. • Floppy Drive Seek During POST, BIOS will determine i f the floppy disk drive installed is 40 or 80 tracks. 360 type is 40 tracks while 720 , 1.2 and 1.44 are all 80 tracks.
  • Page 59: Chipset Features Setup

    BIOS Setup Chipset Features Setup AMIBIOS SETUP –CHIPSET FEATURE CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved *** DRAM Timing *** Top Performance :Disabled SDRAM Timing by SPD :Disabled SDRAM CAS# Latency DRAM Frequency :Auto C2P Concurrency & Master :Enabled DRAM Integrity Mode :Disabled...
  • Page 60 6VM7-4I Motherboard • C2P Concurrency & Master Enabled Enabled C2P Concurrency & Master. (Default Value) Disabled Disabled C2P Concurrency & Master. • DRAM Integrity Mode For 72 bit ECC type DIMM Modle. Disabled Normal Setting. (Default Value) • AGP Mode Set AGP Mode is 4X.
  • Page 61 BIOS Setup • USB Controller All USB Port Set USB Controller Function used all USB Port. (Default Value) USB Port 0&1 Set USB Controller Function used USB Port 0&1. USB Port 2&3 Set USB Controller Function used USB Port 2&3. Disabled USB Controller Function Disabled.
  • Page 62 6VM7-4I Motherboard Power Management Setup AMIBIOS SETUP –POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Sleep Type :S1/POS PME Event Wake up :Enabled USB KB Wakeup From S3-S5 :Disabled RTC Alarm Power On :Disabled...
  • Page 63 BIOS Setup • Suspend Time Out (Minute.) Disabled Disabled Suspend Time Out Function. (Default Value) Enabled Suspend Time Out after 1min. Enabled Suspend Time Out after 2min. Enabled Suspend Time Out after 4min. Enabled Suspend Time Out after 8min. Enabled Suspend Time Out after 10min. Enabled Suspend Time Out after 20min.
  • Page 64 6VM7-4I Motherboard • Modem Use IRQ Set Modem Use IRQ to NA. Set Modem Use IRQ to 3. Set Modem Use IRQ to 4. (Default Value) Set Modem Use IRQ to 5. Set Modem Use IRQ to 7. • Modem Ring On / Wake On Lan Disabled Disabled Modem Ring On / Wake On Lan function.
  • Page 65: Reset Configuration Data

    BIOS Setup PnP/PCI Configurations AMIBIOS SETUP –PNP/PCI CONFIGURATION SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Plug and Play Aware O/S Reset Configuration Data VGA Boot From :AGP PCI VGA Palette Snoop :Disabled DMA Channel 0 :PnP DMA Channel 1 :PnP DMA Channel 3...
  • Page 66 6VM7-4I Motherboard • DMA Channel (0,1,3,5,6,7) The resource is used by PnP device. ISA / EISA The resource is used by ISA / EISA device (PCI or ISA). • IRQ (3,4,5,7, 9,10,11,14,15) PCI/PnP The resource is used by PCI/PnP device.
  • Page 67: Power Management Setup

    BIOS Setup Load BIOS Defaults AMIBIOS SIMPLE SETUP UTILITY -VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD Load BIOS Defaults (Y/N)? N PNP/PCI CONFIGURATION...
  • Page 68: Load Setup Defaults

    6VM7-4I Motherboard Load Setup Defaults AMIBIOS SIMPLE SETUP UTILITY -VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP...
  • Page 69: Integrated Peripherals

    BIOS Setup Integrated Peripherals AMIBIOS SETUP –INTEGRATED PERIPHERAL ( C ) 1999 American Megatrends, Inc. All Rights Reserved OnBoard IDE :Both Game Port (200h-207h) :Enabled OnBoard FDC :Auto OnBoard Serial Port 1 :Auto OnBoard Serial Port 2 :Auto Serial Port 2 Mode :Normal Duplex Mode :N/A...
  • Page 70 6VM7-4I Motherboard • OnBoard Serial Port 2 Auto BIOS will automatically setup the port 2 address (Default Value). 3F8/COM1 Enable onboard Serial port 2 and address is 3F8. 2F8/COM2 Enable onboard Serial port 2 and address is 2F8. 3E8/COM3 Enable onboard Serial port 2 and address is 3E8.
  • Page 71 BIOS Setup • OnBoard AC’97 Audio Auto Set AC’97 Audio to Auto (Default Value). Disabled Disabled AC’97 Audio. • OnBorard MC’97 Modem Auto Set MC’97 Modem to Auto (Default Value). Disabled Disabled MC’97 Modem. • OnBorard Legacy Audio Enabled Enabled onboard Legacy Audio. (Default Value) Disabled Disabled onboard Legacy Audio.
  • Page 72 6VM7-4I Motherboard • FM Port (388h-38Bh) Disabled Disabled FM Port (388h-38Bh). (Default Value) Enabled Enabled FM Port (388h-38Bh). • Game Port (200h-207h) Disabled Disabled Game Port (200h-207h). Enabled Enabled Game Port (200h-207h). (Default Value)
  • Page 73 BIOS Setup Hardware Monitor AMIBIOS SETUP –HARDWARE MONITOR ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Shut Down Temperature :Disabled Current CPU Temp. :36°C/96°F Current System Temp. :28°C/82°F Case Status :Closed Current CPU Fan Speed :5487 RPM Current System Fan Speed :0 RPM Vcore...
  • Page 74 6VM7-4I Motherboard • Case Status If the case is closed, “Case Status” will show “Closed”. If the case have been opened, “Case Opened” will show “Open”. • Current CPU FAN Speed Detect CPU Fan speed status automatically . • Current System FAN Speed Detect System Fan speed status automatically .
  • Page 75: Hardware Monitor Setup

    BIOS Setup Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. AMIBIOS SIMPLE SETUP UTILITY -VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGR ATED PERIPHERALS BIOS FEATURES SETUP...
  • Page 76: Ide Hdd Auto Detection

    6VM7-4I Motherboard IDE HDD AUTO Detection AMIBIOS SETUP – STANDARD CMOS SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Tue Jan 25, 2000 Time (hh/mm/ss) : 10:36:24 TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR...
  • Page 77: Save & Exit Setup

    BIOS Setup Save & Exit Setup AMIBIOS SIMPLE SETUP UTILITY -VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP/PCI CONFIGURATION IDE HDD AUTO DETECTION...
  • Page 78: Exit Without Saving

    6VM7-4I Motherboard Exit Without Saving AMIBIOS SIMPLE SETUP UTILITY -VERSION 1.22 ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHER ALS BIOS FEATURES SETUP HARDWARE MONITOR SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP...
  • Page 79: Appendix

    Appendix Appendix Appendix A : VIA Chipsets Driver Installation A.VIA 4 in 1 Service Pack Utility: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click “VIA 4in 1 Service Pack 2.Click “Next”.
  • Page 80 6VM7-4I Motherboard 8.Click “Next”. 7.Click “Next”. 10.Click “Finish” to restart computer. 9.Click “Next”. (10)
  • Page 81 Appendix Appendix B: VIA Sound Driver A. AC’97 Audio Driver: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. Audio 2.Click “Next”. 1.Click “AC’97 Audio Driver”...
  • Page 82 C:\utility \ AWDFlash or AMIFlash <filename of the BIOS binary file intended for flashing> Once the process is finished, reboot the system ü MNote: Please download the newest BIOS from our website (www.gigabyte.com.tw) or contact your local dealer for the file.
  • Page 83 Appendix Appendix D: Acronyms Acor. Meaning ACPI Advanced Configuration and Power Interface POST Power-On Self Test Local Area Network Extended Capabilities Port Advanced Power Management Direct Memory Access Megahertz ESCD Extended System Configuration Data Central Processing Unit Symmetric Multi-Processing Universal Serial Bus Operating System Error Checking and Correcting Integrated Dual Channel Enhanced...
  • Page 84 6VM7-4I Motherboard Acor. Meaning Peripheral Component Interconnect RIMM Rambus in-line Memory Module Dual Retention Mechanism Industry Standard Architecture Memory Translator Hub CRIMM Continuity RIMM...

This manual is also suitable for:

Ga-6vm7-4i

Table of Contents