Inside Cuts - Grizzly G1060 Instruction Manual

Inside Cuts

Inside cuts such as circles or the insides of closed
letters can be easily cut with your Scroll Saw by
threading the blade through the workpiece's
closed loop from the bottom and remounting the
blade in the chucks. This procedure is described
below.
1. Remove Table Insert.
2. Flip open Chuck Guard and loosen Upper
Arm Chuck.
3. Remove blade from the Upper Chuck using
Chuck Holder.
4. Drill a hole in the waste portion of the work-
piece.
5. Thread the Blade through the workpiece and
let the workpiece rest on the table. Remount
Blade in Chuck, carefully aligning the ridge
on the bottom of the Chuck to the V-groove
in the Upper Arm. Figure 12.
Figure 12.
-14-
6. Secure the Blade in the Chuck. This will
require an Allen wrench and a pair of pliers.
Figure 13.
7. Replace Table Insert.
8. Make cuts.
9. Remove blade from the chuck to release the
workpiece.
Figure 13.
G1060 22'' Scroll Saw