Table of Contents
Advertisement
You can use the q
gateway. Click Quick Setup in the operation navigation to
to access the PPP profile setting page following the page prompts.
Configuring PPP Profile Settings
Profile Name: Enter the profile name when the text box is null.
Dial-up Number/PPP User Name/
provided by the internet service provider (ISP). The dial-up number is used to initiate
network call; and the PPP user name and password is used to gain the service
authorization provided by the ISP.
APN/IP Address: Select the mode for obtaining the APN or IP address. If the carrier
provides the relevant parameters, select Static and enter the AP
Otherwise, you need to select Dynamic and the gateway autom
Selecting the PPP Connection Mode
PPP Connection: It is used to select the dial-up access mode.
Auto: After the gateway is switched on, it automatically connects to the Internet and will
not disconnect regardless of the data tr ansmission.
On Demand: The gateway automatically connects to the Internet when
transmission. When the duration of no data transmission exceeds the Max Idle Time, it
automatically closes the
Manual: Manual dial-up. For details, see "Connecting to the Internet."
PPP Authentication: The service is provided by your
details, consult your ISP.
Configuring the WLAN Setting
SSID: Enter a name for your WLAN.
The service set identifier (SSID) is used to identify a WLAN. A wireless terminal (such as a
PC) and the wireless gateway can perform normal data communication only when they
have the same SSIDs. To ensure the WLAN security, do not use the default SSID. You can
uick setup wizard to configure and maintain the basic parameters of the
connection.
2
PPP Password: Enter these three parameters
Internet Service Provider (ISP). For
Quick Setup
access the welcome page. Click
N and IP address.
atically obtains them.
there is data
the
7
Hide quick links:
Advertisement
Table of Contents
