Restoring Factory Defaults; Restarting The Device; Viewing The Version Information - Huawei 3G Wireless Gateway User Manual

Caution:
After the system is upgraded, the system automatically restarts. The whole
process takes two to three minutes.
The software programs for upgrading must come from the official website of
Huawei or the official website of the carrier.
The system upgrading does not change the configuration of the client.

Restoring Factory Defaults

If you need to reconstruct the network or you forget the changes of some parameters, you
can choose to restore factory defaults and reconfigure the gateway.
Click to open the Restore Defaults window, and then click
Note:
After this operation, all configurations restore to the defaults.

Restarting the Device

1. Click
2. Click

Viewing the Version Information

Click to display the System Version page. You can view the hardware version,
software version, release time, and the hardware version and software version of the
wireless module.
to open the Reboot window.
to restart the gateway.
.
17