Water Hardness; Full Tank Warning - On/Off - AEG Electrolux LAVATHERM 88800 User Manual

WATER HARDNESS

Water contains, a variable quantity of lime-
stone and mineral salts of which quantities
vary according to geographical locations thus
varying its conductivity values.
Relevant variations of the conductivity of the
water compared to those prefixed by the
factory could slightly influence the residual
humidity of the laundry at the end of the cy-
cle. Your dryer allows you to regulate the sensitivity of the drying sensor based on
conductivity values of the water.
1. Press OPTION (OPTIE) button until WATER HARDNESS selected.
2. Press OK to confirm - frame around bar indicator starts blinking.
3. Press OPTION (OPTIE) until you set right hardness level.
4. Press OK to confirm.
available selections:
– MIN- low conductivity <300 micro S/cm
– MED - medium conductivity 300-600 micro S/cm
– MAX- high conductivity >600 micro S/cm
MED is set as default.

FULL TANK WARNING - ON/OFF

The container indicator at the end of the pro-
gramme can be deactivated, for example, if
an external condensed water drain is instal-
led.
1. Press OPTION (OPTIE) button until FULL
TANK WARNING selected.
2. Press OK to confirm - frame around bar
indicator starts blinking.
3. Press OPTION (OPTIE) until you set right status.
4. Press OK to confirm.
Machine settings
SETTINGS
CONTRAST
WATER HARDNESS
FULL TANK WARNING
SETTINGS
WATER HARDNESS
FULL TANK WARNING
Back
47
MAX
ON