Setting Delay (Startuitstel) Function; Starting The Pro Steam Programme - AEG Electrolux LAVATHERM 88800 User Manual

In certain programmes the spin speed has not effect (time controlled cycles), its
selection can be not selectable and only three dashes are visualized. Available se-
lections: from 800 to 1800 rpm's in 100 rpm's intervals.
The maximum value depends by selected program, the minimum is always 800 rpm
For those programs where the spin speed has no effect (time controlled cycles), the
selection is not allowed and three dashes "- - -" are displayed that has the meaning
of not set or unknown.
The user interface always remembers last spin selection, and proposes it as default
for all new selected programs. If memorized spin speed is greater than maximum
allowed value it will be automatically reduced to max spin speed available for the
selected program.

Setting DELAY (STARTUITSTEL) function

With the DELAY (START UITSTEL) button, you can delay the start of a Pro
Steam programme by between 30 minutes and a maximum of 20 hours.
1. Select the programme and additional functions/options if necessary.
2. Press the DELAY (STARTUITSTEL)button as many times as necessary.
During selection, END TIME of the cycle increases in the display and delay
icon is on.
If you reach 20 hours of start delay and you press the button again, the time
delay is cancelled and delay icon disappears.
3. To activate the delay timer, press the START PAUSE (START PAUZE) button. The
amount of time remaining until the programme is set to start is continuously
displayed (e.g. 5:00 hours, 4:59... 0:30 minutes etc).
The message Delay Start and delay icon

Starting the Pro Steam programme

Press the START PAUSE (START/PAUZE) button. The programme starts.
The progress bar and the name of currently performed phase, above it, show stage
of the cycle.
With wet laundry, after a few minutes the appliance will show the correct pro-
gramme duration for the Pro Steam programme including the preceding drying
programme.
is on.
25