Changing A Programme; Putting In Extra Items Or Taking Items Out Before End Of Programme - AEG Electrolux LAVATHERM 88800 User Manual

26
As soon as the right level of dryness is reached, the Pro Steam programme will start
automatically. Alternately STEAM TREATMENT and STEAM INJECTION phases names
are displayed.
During the steam phases that form part of the Pro Steam programme and
also the anti-crease phase the loading door cannot be opened.
Risk of burns!
If the steam water tank is empty when you
select a Pro Steam programme the following
The steam water tank is empty. Please fill it
message will appear on the display (see pic-
and then press START.
ture). The programme cannot be started. You
will need to fill the water tank first (see chap-
ter Pro Steam system- section Filling steam
water tank)
It is normal for the appliance to make noises
during a Pro Steam or drying programme if garments with hard parts, such as metal
buttons, are put in the drum.

Changing a programme

To change a programme which has been selected by mistake once the programme
has started, first turn the programme selector to OFF (UIT) and then reset the pro-
gramme.
The programme can no longer be changed directly once the programme has
started. If you nevertheless attempt to change the programme with the
programme knob the following message is shown:
Please turn programme selector to the last used position.
The drying programme is not however affected by this.
Putting in extra items or taking items out before end of
programme
1. Open loading door.
WARNING!
Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.