Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking the brake discs
9.23
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be pleased to help.)
To reactivate ABS, stop the vehicle and switch off the ignition. ABS is reactivated when the
vehicle is started up again. The ABS warning lamp goes out after you start riding.
Button
can be used to switch the ABS off manually (see Starting).
–
Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement
Info
Wear reduces the thickness of the brake disc in area
Brake discs - wear limit
Front
Brake disc - wear limit
400618-10
Rear
»
If the brake disc thickness is less than the specified value:
–
Change the brake disc.
–
Check the front and rear brake discs for damage, cracks and deformation.
»
If damage, cracks or deformation are visible on the brake disc:
–
Change the brake disc.
.
4.5 mm (0.177 in)
4.5 mm (0.177 in)
87
of the brake disc.
Advertisement
Table of Contents
