MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the underride guard
9.41
–
Strike each spoke briefly using a screwdriver blade.
Info
The frequency of the sound is a function of the spoke length and spoke diame-
ter.
If spokes of the same length and diameter vibrate with a different tone, this is
an indication that the spoke tensions differ.
You should hear a high note.
100576-10
»
If the spoke tension differs:
–
Correct the spoke tension.
x
–
Jack up the vehicle on the center stand. (
–
Swing the side stand downward.
–
Remove all four screws
100577-10
x
p. 66)
and take off underride guard
109
.