Alpine INA-W910R Owner's Manual page 99

Antenna Receptacle
ISO/JASO Antenna Adapter (sold separately)
ISO/JASO Antenna Adapter may be required, depending on
the vehicle.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
Camera Switch Lead (Black)
Not used for this unit now.
Guide Control Lead (White/Green)
Use when an optional External Audio Processor with guide
control input terminal is connected.
Steering Remote Control Interface Connector (Black)
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
Video Input Connector (AUX INPUT) (Yellow)
Input the video.
Audio Input Connectors (AUX INPUT)
RED is right and WHITE is left input the audio.
Video Output Connector (AUX OUTPUT) (Yellow)
Output the video.
Audio Output Connectors (AUX OUTPUT)
RED is right and WHITE is left output the audio.
Guide Connector (Black)
Output the audio signal of navigation interruption.
When connecting an Audio processor, connect this lead to
the Guide Input terminal with an optional RCA Extension
cable.
Camera Output RCA Connector (CAMERA IN)
(Yellow)
Use when connecting an optional camera with RCA/Video
output connector.
• Set "RCA" in "Setting the Camera Input" (page 48) when
connecting a camera with RCA Output connector.
Rear Output/Input RCA Connectors
It can be used as Rear Output or Input RCA Connectors.
Front Output/Input RCA Connectors
It can be used as Front Output or Input RCA Connectors.
Subwoofer RCA Connectors
RED is right and WHITE is left.
RCA Extension Cable (sold separately)
Direct CAMERA Input Connector
Use when the optional direct camera is connected.
• When an Alpine rearview camera HCE-C300R is used, please make
sure to connect it to this unit via Direct CAMERA Input Connector.
iPod AUDIO/VIDEO Input Connector
Input the iPhone/video compatible iPod audio/video signal
or AUX video/audio signal.
• Set "AUX2 IN" to "iPod Video" in "Setting the AUX Mode"
(page 48) when an iPhone or a video compatible iPod is connected.
• Set "AUX2 IN" to "AUX" in "Setting the AUX Mode" (page 48)
when normal AUX video/audio is input.
GPS Antenna Receptacle
To GPS Antenna.
MIC Input Connector
To Microphone (supplied).
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
• Be sure to set "Setting the Connected Head Unit (MODEL SETUP)"
to "DVD CHG", when the DHA-S690 is connected.
USB Connector
AUX I/O/Camera Input Connector
RCA Output/Input Connector
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switches in the
NORM position.
• Be sure to turn the power off to the unit before changing the switch
position.
Power Supply Connector
Digital Output Terminal (Optical)
Use when combining fiber optic digital input compatible
products. Be sure to use the Optical Digital Cable
(KWE-610A) (sold separately) only.
Ai-NET Cable (Included with CD Changer)
Audio Interrupt In Lead (Pink/Black)
Not used for this unit.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the INA-W910R.
Speed Sensor Lead (Green/White)
Improper connection of the speed pulse line may cause
important safety features of the vehicle to fail (such as the
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a trained, authorized Alpine dealer.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
99
-EN