Alpine INA-W910R Owner's Manual page 90

• The DVD setup operation was attempted when a disc is inserted
in the unit.
- Eject the disc before the DVD setup operation.
(DivX® mode)
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
Indication for CD changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
90
-EN
Indication for USB Memory/Portable audio player
• Database error or decoder error.
- You can solve the problem by reconnecting the USB Memory/
Portable audio player.
• Communication error or boot error, etc.
- You can solve the problem by reconnecting the USB memory/
Portable audio player or changing source.
• The Portable audio player is not verified.
- Change another Portable audio player.
• Abnormal current is run to the USB connector device.
- Connect another USB memory/Portable audio player.
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
• A USB Memory/Portable audio player is not connected.
- Make sure the USB Memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB Memory/Portable audio
player.
- Connect the USB Memory device/Portable audio player after
storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.