Switch - Grizzly G1019 Instruction Manual

Switch

The switch is pre-mounted on the bandsaw unit.
To lock-out the switch, you must unplug the safe-
ty key from the top of the paddle as shown in
Figure 12. Never subsitute unplugging the
machine from the power source with removing the
lock-out key from the switch.
Figure 12. Removing lock-out key from switch.
G1019 14'' Bandsaw
To connect the switch power to the motor, plug
the male end into the female end as shown in
Figure 13.
Figure 13. Connecting switch to motor.
-13-