Grizzly G1016 Instruction Manual page 6

18. NEVER STAND OR LEAN ON
TOOL. Serious injury could occur if the
tool is tipped or if the cutting edge is acci-
dentally contacted.
19. CHECK DAMAGED PARTS. Before
further use of the tool, any part or guard
that is damaged should be promptly
repaired or replaced. Do not operate the
machine until you are certain that it is in
perfect running condition. Failure to fol-
low this precaution could result in further
mechanical damage and operator injury.
20. DO NOT WORK IN HASTE or oper-
ate machine if you are mentally or physi-
cally fatigued.
21. NEVER LEAVE THE TOOL RUN-
NING UNATTENDED
POWER OFF. Do not leave the tool until
it comes to a full stop.
Remember:
Safety First!
II. Safety Rules for all Tools
22. DO NOT OPERATE THE TOOL
23. IF THERE IS SOMETHING YOU
24. BAD HABITS ARE DANGEROUS.
These safety rules, while expansive, may not
cover every situation. Please consider your
unique conditions when setting up and using
your saw.
- TURN
More safety rules are reviewed in Section
IX.
UNDER THE INFLUENCE
DRUGS, ALCOHOL, OR MEDICA-
TION. Never operate machinery when
overly fatigued.
DO NOT KNOW OR UNDERSTAND
ABOUT THIS MACHINE, DO NOT
OPERATE IT! Ask for help first.
Confusion is dangerous.
Review all safety procedures often.
Hunter's Meat Cutting Bandsaw
OF
End of Section
- 3 -