Step 1: Install The Central Processing Unit (Cpu) - Gigabyte GA-9ITDW User Manual

GA-9ITDW Motherboard

Step 1: Install the Central Processing Unit (CPU)

Before installing the processor , adhere to the following warning:
If you do not match the CPU socket Pin 1 and CPU cut edge well, it will
cause improper installation. Please change the insert orientation.
Please make sure the CPU type is supported by the motherboard.
1. Angling the rod to 65-degree maybe feel a
kind of t ight , and t hen cont i nue pull the rod to
90-degree when a noise "cough" made.
Pin1 indicator
3. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
Pin1 indicator
2. CPU Top View
4. Press down the CPU socket lever
and finish CPU installation.
10