Gigabyte GA-9ITDW User Manual page 33

e) SCSILED1
You c an connec t the SCSI indicativ e LED of y our SCSI add-on card to this connec tor, w hic h can
indic ate w hether the SCSI dev ice is activ e or not.
f ) Battery
If you want to erase CM OS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
Connector Introduction
1 Pin No.
1
2
3
4
CAUTION
v Danger of explosion if battery is incorrectly
replaced.
v Replace only with the same or equivalent
type recommended by the manufacturer.
v Dispose of used batteries according to the
manufacturer' s instructions.
33
Definition
GND
SCSI_CONN_LED#
SCSI_CONN_LED#
GND