Hard Disk Boot Priority - Gigabyte GA-9ITDW User Manual

C DRAM Data Integrity Mode
Set DRAM mode at ECC.
8ECC
C Hard Disk Boot Priority
These three fields determines which type of device the system attempt to boot from after
BIOS Post completed. Specifies the boot sequence from the available devices. If the first
device is not a bootable device, the system will seek for next available device.
4 First/ Second/ Third Boot Device
Select the first/second/t\hird boot device
Floppy Select your boot device priority by Floppy.
8
Select y our boot dev ice priority by LS120.
8LS120
8Hard Disk Select y our boot dev ice priority by Hard Disk.
Select y our boot dev ice priority by CDROM.
8CDROM
Select y our boot dev ice priority by ZIP100.
8ZIP100
Select y our boot dev ice priority by USB-FDD.
8USB-FDD
Select y our boot dev ice priority by USB-ZIP.
8USB-ZIP
8USB-CDROM Select y our boot dev ice priority by USB-CDROM.
Select y our boot dev ice priority by LAN.
8LAN
Select y our boot dev ice priority by Disabled.
8Disabled
4 Boot Other Device
Select the specified boot device priority.
Enabled Enable the specified boot device.
8
Disable the specified boot dev ice.
8Disabled
45
BIOS Setup