Hi-Hat Settings [F3 (Hi-Hat)] - Roland TD-12 Owner's Manual

Chapter 5. Trigger Settings [TRIGGER]
Curve: LOG1, LOG2
Compared to LINEAR, a soft playing produces a greater
change.
fig.VeloC-LOG.e
Volume
LOG1
Curve: SPLINE
Extreme changes are made in response to playing dynamics.
fig.VeloC-SPLINE.e
Volume
Striking Force
SPLINE
Curve: LOUD1, LOUD2
Very little dynamic response, making it easy to maintain
strong volume levels. If using drum triggers, these settings
help maintain stable levels.
fig.VeloC-LOUD.e
Volume
LOUD1
46
Volume
Striking Force
LOG2
Volume
Striking Force
LOUD2

Hi-Hat Settings [F3 (HI-HAT)]

1. Press [TRIGGER] - [F3 (HI-HAT)].
[TRIGGER] lights, and the "TRIGGER HIHAT" screen
appears.
fig.05-TrigHH_70
2. Use [CURSOR (up/down)] to select the
parameter.
3. Use [+/-] or [VALUE] to adjust the setting.
4. When you're finished, press [EXIT] to return to
the "DRUM KIT" screen.
Parameter Value
Hi-Hat Ctrl VH12,
Type VH11/FD
When HH Ctrl Type is set to "VH12"
Offset -100– +100
Foot Splash -10– +10
Sens
Noise Cancel 1–3
When HH Ctrl Type is set to "VH11/FD"
Foot Splash -10– +10
Sens
CC Max 90, 127
CC NORMAL,
Resolution HIGH
*1: When you control the pitch by Hi-Hat Pedal (p. 38), the
pitch can be changed smoothly if you set "High."
Description
Used Hi-Hat Controller
VH12: VH-12
VH11/FD: VH-11, FD-8
Extent of Opening Hi-Hat
The bigger the value is,
the wider the opening
extent is.
After setting the auto-
matic adjustment (p. 48),
make fine adjustments
until you achieve the set-
tings you like.
Amount of how easy to
make the Foot Splash
Amount of strength to can-
cel the bow and edge noise
when you play "Foot
Close."
The bigger the value is,
the more difficult to
have a noise excluding
the "Foot Close."
Amount of how easy to
make the Foot Splash
Amount of Control
Change that is transmitted
in stepping the pedal down
completely.
Amount of Data Resolu-
tion that is transmitted
from Hi-Hat Pedal. (*1)