Table of Contents
Advertisement
Warning!
Before cleaning your Hunter fan, turn the unit off, unplug it, and disconnect the water hose from the
misting valve. Never use harmful or abrasive chemicals and ALWAYS unplug the fan.
Fan Maintenance:
The fan body and grill can be cleaned with a slightly damp cloth. A mild dish detergent can be used if necessary. When
cleaning the fan, ensure you DO NOT let excess water drip into the base of the motor where the controls are or into
the motor compartment in the grill.
Misting Nozzle Maintenance:
1.
To clean the misting nozzles, use a pair of needle nose pliers to twist each nozzle counterclockwise.
2.
Once removed, soak the nozzles in white vinegar for 2 hours.
3.
Rinse each nozzle with water and place back into the front fan grill.
4.
Twist clockwise until secure. DO NOT over tighten.
1.
Problem
Misting feature sputters or does not mist at all.
Solution
•
Ensure your outside water faucet is turned all the way on.
•
Check the fan's Valve (Y) lever and make sure it set open.
•
Check your water hose for kinks or buckles.
•
The misting nozzles on the fan may be clogged. Follow the instructions in the "Misting Nozzle Maintenance"
section above.
MAINTENANCE
TROUBLESHOOTING
©2012 Hunter Fan Co.
9
Advertisement
Table of Contents
