Table of Contents
Advertisement
messages.
1. In the message area of an e-mail message, press [Menu] [Insert] [Picture].
2. Select the picture you want to add.
Verify the digital signature on a signed message you receive
For additional security, you can check digital signatures on messages before opening them. In some cases,
the signatures may not be available.
1. Open the message that has been digitally signed.
2. At the top of the message, press View Signature Status.
3. Press [Menu] [Check Certificate].
NOTE: There can be several reasons why a digital signature is not valid. For example, the sender's
certificate may have expired, it may have been revoked by the certificate authority, or the server that verifies
the certificate is unavailable. Contact the sender to report the problem.
S/MIME encryption and digital signatures for Windows Mobile-based devices are available only with
Exchange Server 2003 Service Pack 2 or a later version that supports S/MIME. If you aren't using one of
these products, or have not yet synchronized, these options are unavailable.
Send and receive Internet e-mail messages
Using the Pantech
C820
you can connect to the Internet to send and receive e-mails.
1. On the Home screen, press [Start] [All Programs] [Messaging].
2. Select the Internet e-mail account for which you want to send and receive messages.
3. Press [Menu] [Send/Receive]. The phone connects to your Internet e-mail server and sends and
receives your messages.
NOTE: To stop this process, press [Menu] [Stop Send/Receive].
Add a voice recording to an e-mail message
Inserting a voice recording is useful when you want to verbally explain information that is contained in the
message.
1. In the message area of an e-mail message, press [Menu] [Insert] [Voice Note].
2. Press Record and Start speaking into the phone's microphone.
3. When finished speaking, press Stop.
4. Press [Done].
Press [Send].
5.
48/142
Advertisement
Table of Contents
