Call A Contact From Contact Information; Call A Contact From The Contact List; Change The Default Number For A Contact; Duplicate A Contact - Pantech AT&T C820 User Manual

5. Press the Menu and select the Bluetooth Settings.
6. Press the Settings and check 'Allow other Bluetooth devices to see this phone'
NOTE: More information about Bluetooth, see Chapter 13 Bluetooth section.

Call a contact from contact information

You can call a contact directly by selecting them from the Contacts page off the Home screen.
1. On the Home screen, press left soft key
directly press right soft key [Contacts].
2. Select the contact to call and press OK.
3. Scroll to the phone number to dial.
4. Press OK or SEND.

Call a contact from the contact list

If you do not select one of the contacts phone numbers, but you press Send, your phone will dial the default
number for that contact.
1. On the Home screen, press left soft key
directly press right soft key [Contacts].
2. Select the contact to call.
3. Press SEND. The contact's default phone number is dialed.
TIP: To call a phone number other than the default, press the contact, press OK and scroll to the number you
want to dial, then press SEND.

Change the default number for a contact

The default number for the contact will be the first number displayed. If you need to change the default
number, you will use the Navigation key to set the default.
1. On the Home screen, press left soft key
2. Select Contacts and press OK.
3. Select the contact whose default number you want to change.
4. Press the Navigation Key left or right to select the number or other contact method that you want to
set as the default. For example, (m)obile, (h)ome or (w)ork.

Duplicate a contact

This feature allows you to copy contacts in Device or SIM to the same area. (Device -> Device, SIM -> SIM)
1 On the Home screen, press the left soft key
2 Select Contacts and press OK.
3 Scroll to the contact to duplicate
4 Press the right soft key
5 Select Duplicate Contact from the popup menu and press OK.
[Start] [All Programs] and select [contacts] or
[Start] [All Programs] and select [contacts] or
[Start] [All Programs].
[Start] [All Programs].
[Menu].
34/142