MSI MS-6567 User Manual page 49

vice to enhance Max Saving mode and stop CPU internal clock. Settings:
Disabled, Enabled.
Init VGA BIOS From S3
Selecting Enabled allows BIOS to call VGA BIOS to initialize the VGA card
when system wakes up (resume) from S3 sleep state. The system resume time
is shortened when you disable the function, but system will need an AGP
driver to initialize the VGA card. Therefore, if the AGP driver of the card does
not support the initialization feature, the display may work abnormally or not
function after resuming from S3.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep/suspend state. Available options are:
Single LED The power LED turns off to indicate the sleep/suspend
Dual LED
Suspend Time Out
After the selected period of system inactivity, all devices except the CPU shut
off. Settings: Disabled, 1 min, 2 min, 3 min, 4 min, 5 min, 10 min, 15 min, 20
min, 30 min.
Pentium 4 Thermal Monitor
This setting enables/disables the monitoring of the Pentium 4 processor tem-
perature to prevent the CPU from overheating.
Power Button Function
This feature sets the function of the power button. Settings are:
Power Off
Suspend
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Power Off
Power On
Last State
state.
The power LED changes its color to indicate the sleep/
suspend state.
The power button functions as normal power off button.
When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the status before power failure or
3-15
BIOS Setup