MSI MS-6567 User Manual page 31

S-Bracket Connector: JSP3 (Optional)
The connector allows you to connect a S-Bracket for Sony & Philips
Digital Interface (SPDIF). The S-Bracket offers 2 SPDIF jacks for digital audio
transmission (one for optical fiber connection and the other for coaxial), and 2
analog Line-Out jacks for 4-channel audio output.
To attach the fiber-optic cable to optical SPDIF jack, you need to remove
the plug from the jack first. The two SPDIF jacks support SPDIF output only.
For more information on the S-Bracket, refer to Appendix A: Using 4- or 6-
Channel Audio Function.
2
1
JSP3
PIN SIGNAL
1 VCC5
3 SPDFO
5 GND
7 LFE-OUT
9 GET-OUT
1 1 GND
SPDIF jack (optical)
Plug
12
11
JSP3 Pin Definition
DESCRIPTION PIN
VCC 5V 2
S/PDIF output 4
Ground 6
Audio bass output 8
Audio center output 10
Ground 12
S-Bracket
SPDIF jack (coaxial)
2-21
SIGNAL DESCRIPTION
VDD3 VDD 3.3V
(No Pin) Key
SPDFI S/PDIF input
SOUT-R Audio right surrounding output
SOUT-L Audio left surrounding output
GND Ground
Hardware Setup
Analog Line-Out
jacks