Denon AVR-E400 Owner's Manual page 128

Quick Select Names
Change the "Quick Select" display title to one you prefer.
Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4
• Up to 16 characters can be input.
• For character input, see page 99.
Set Defaults : The input source name is returned to the default setting.
• Reset : Reset to the defaults.
• Cancel : Do not reset to the defaults.
If you select "Set Defaults" and press
Quick Select names to the factory defaults?" is displayed. Select "Reset" or
ENTER
"Cancel", and then press .
Auto Standby
When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, "Auto Standby" is
displayed on the display of this unit and the menu screen.
60 min : The unit goes into standby after 60 minutes.
30 min : The unit goes into standby after 30 minutes.
Off : The unit does not go into standby automatically.
DVD
Setting details
ENTER
, the message "Reset all
Default settings are underlined.
Setting details
Front Display
Makes settings related to the display on this unit.
Setting items
Dimmer Bright : Normal display brightness.
Dim : Reduced display brightness.
Adjust the display
brightness of this unit. Dark : Very low display brightness.
Off : Turns the display off.
Buttons on the main unit can be used for operations.
Each time
below.
NOTE
When "Dimmer" is set to "Off", the display turns off and appears as if
there is no electricity.
125
Default settings are underlined.
Setting details
DIMMER is pressed, the setting is changed as shown
Bright Dim
Off Dark
General