Introduction
This chapter provides an overview of the Verbatim MediaShare system and covers the unit's physical features, and initial setup steps. Topics
discussed in this chapter include:
•
MediaShare Hardware Overview
•
Accessing the MediaShare
•
Resetting Your MediaShare
MediaShare Hardware Overview
This section introduces the MediaShare hardware components, including displays, ports and buttons.
Front Panel
The front panel of the MediaShare includes an Easy Transfer button which is used to quickly and easily transfer all fi les and folders from
a USB drive to MediaShare through the USB port also on the front. Status LED's are also included to indicate the active/inactive status of
the system.
Easy Transfer Button
Status LED
Left LED
Middle LED
Right LED
Back Panel
LED and Connector Descriptions
The function of each MediaShare item is described in the following table.
USB Port used with Easy Transfer Button
Purpose
HDD Activity
Rear USB port(s) activity
eSata port activity
Status LED's
LED Status
Solid Green: Ready status.
Blink Blue: Read/write access to
internal hard drive
Blink Orange: System powering off.
Blink Orange: Read/write activity to USB.
Blink Blue: Read/write activity to internal
hard drive
Blink blue during access to eSata hard drive
3