Introduction; Backup Software; Connecting Your Portable Hard Drive; Disconnecting Your Portable Hard Drive - Verbatim Store'n'Go SuperSpeed USB 3.0 User Manual

Note: Capacity dependent on model. 1 MB = 1,000,000 bytes/
1 GB = 1,000,000,000 bytes/1 TB = 1,000,000,000,000 bytes.
Some capacity used for pre-loaded software, formatting and
other functions, and thus is not available for data storage. As
a result, and due to differing calculation methods, your operating
systems may report as fewer megabytes/gigabytes/terabytes.

Introduction

Your Verbatim Store 'n ' Go USB 3.0 portable hard drive features high-
performance storage using a USB 3.0 "SuperSpeed" interface. USB 3.0
offers up to 10 times faster data rates than USB 2.0, while maintaing
backwards compatibility to any USB 2.0 ports on your computer. Once
your drive is connected properly to your computer, you will be able
to use it as you would any hard drive for storing your data and for
performing data back-up functions.

Backup Software

(for Windows only)
Nero backup software is included on the hard drive. Double click the
Nero folder on the drive and then double click the setupx file to start
installation. The Nero Installation window will appear. Follow the set
up wizard to install the software.

Connecting Your Portable Hard Drive

Installing your portable hard drive is extremely simple – just use the
included mini-USB cable to connect your hard drive to any free USB
port on your computer. On Windows computers, a new icon will appear
in My Computer representing your hard drive. On Mac OS systems, your
hard drive will appear on the desktop as a new disk.

Disconnecting Your Portable Hard Drive

Your Verbatim portable hard drive is hot-pluggable; it can be connected
and disconnected without restarting your computer. To disconnect
your Verbatim hard drive at any time, simply perform the following
steps. You can also disconnect your hard drive at any time while your
computer is powered off.
1
Note: Please be careful to follow the correct procedure when
disconnecting your unit. Simply unplugging the unit without first
following the instructions below may result in damage to your
unit and/or loss of data.

For Windows Users:

1. If you have files located on your drive open in any applications,
close them.
2. Click the Unplug or Eject Hardware button in the System Tray.
3. Select your drive from the menu that appears.
4. After a moment, Windows will display a message that your
hardware can be safely removed.

For Mac OS Users:

1. If you have files located on your drive open in any applications,
close them.
2. Locate the icon for your drive on the desktop, and drag it to the
trash.

Getting Help

If you are experiencing difficulty installing or using your Verbatim
product, please visit the main Technical Support website at
www.verbatim.com/support.

Limited Warranty Terms

The Verbatim Americas, LLC warranty obligations for this hardware product
are limited to the terms set forth below:
Verbatim warrants its products to be free of defects in material and
workmanship under normal use and service for a period of 7 years from
the date of purchase. Verbatim's sole obligation with respect to claims of
2