How Polar M71 Ti Works; Polar M71 Ti Parts; Getting Going - Polar Electro M71ti User Manual

H O W P O L A R
M 7 1 t i W O R K S
P O L A R M 7 1 t i P A R T S
Your Polar M71 ti consists of three parts:
1. Polar Coded Transmitter™
• Grooved electrode areas
2. Elastic strap
3. Polar M71 ti wrist receiver
6
G E T T I N G G O I N G
1. Attach the transmitter to
the elastic strap.
2. Adjust the strap length to fit
snugly and comfortably.
Secure the strap around your
chest, below the chest
muscles. Lock the buckle.
3. Lift the transmitter off your
chest and wet the grooved
electrode areas on the back of it.
4. Check that the wet electrode
areas are firmly against your
skin and the Polar logo is in
a central upright position.
5. Wear the wrist receiver as you
would wear an ordinary watch.
If you go biking, you may attach
the wrist receiver to a Polar
Bike Mount. Keep the wrist
receiver within the transmission
range (1 metre /3 feet).
It is recommended that you wear the transmitter
against your bare skin to ensure flawless operation.
However, if you wish to wear the transmitter over a
shirt, moisten the shirt well under the electrodes.
It is important that the electrodes are wet during
exercise. After exercising, to preserve the electrodes
and battery life:
1. Wash the transmitter carefully with a mild soap
water solution.
2. Rinse it with pure water.
3. Dry the transmitter carefully.
7