Wireless 802.11 Security Settings - Intermec PC23d User Manual

Appendix A — Specifications and Default Settings

Wireless 802.11 Security Settings

Setting
Security Type
Association
Pre-Shared Key
Network Key Index Selects the active network key to use for WEP security.
Network Key 1,
Network Key 2,
Network Key 3,
Network Key 4
User Name
Password
Anonymous Name Sets the outer EAP user name that the printer uses for
Inner
Authentication
CA Certificate
Client Certificate
156
This section describes the 802.11 security settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Security.
• From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Description
Selects the protocol the radio uses to verify its identity
and makes sure that it is authorized to communicate on
the wireless network.
Selects the security method that the radio uses to get
access to the wireless network.
Defines the passphrase that allows the radio to
authenticate over the wireless network (for both WPA and
WPA2 security). Range is 8 to 64 characters.
Range is 1 to 4.
Defines a network key that is used for WEP security. Keys
are entered in ASCII or hexadecimal (preceded by 0x)
format.
Sets the name that the printer uses when logging in to the
network. Range is 1 to 96 characters.
Sets the password that the printer uses when logging in to
the network. Range is 1 to 96 characters.
logging in to the network. Maximum length is 96
characters.
Selects the authentication method that is used when the
EAP type is EAP-FAST, PEAP, or TTLS.
Sets the name of the Certificate Authority (CA) that
verifies the server certificate. This CA should be the same
one that was used to sign the server certificate.
Sets the name of the client certificate the printer uses to
authenticate to the network using EAP-TLS. Maximum
length is 128 characters.
PC23 and PC43 Desktop Printer User Manual
Default
None
Open/WEP
None
1
Empty string
None
None
Empty string
MSCHAPv2
intermec.pem
None