Use The Setup Wizard; Print Print Quality Labels From The Main Menu - Intermec PC23d User Manual

Use the Setup Wizard

Print Print Quality Labels from the Main Menu

PC23 and PC43 Desktop Printer User Manual
3 Press the power switch to turn the printer on. As the printer starts
up:
• a progress bar appears on the LCD printer screen. When the
printer has finished starting up, the Ready screen appears, and
the blue Ready-to-Work™ indicator turns on and stays on.
the icons turn on and then turn off one at a time on the icon
•
panel. When the printer has finished starting up, the blue
Ready-to-Work indicator turns on and stays on.
If a condition occurs that will prevent printing, the Ready-to-Work
light blinks.
This section explains how to use the Setup Wizard to configure the
LCD printer. You must configure the printer this way after turning it
on for the first time, after upgrading the firmware, or after resetting all
defaults.
1 Connect the printer to power and press the Power switch. When the
printer is ready, the Setup Wizard starts.
2 Select the settings you want from the menus in the Setup Wizard.
• Use or to select different items in a list.
• If the item you selected requires you to select an option from a
preset list, press or to scroll through the list items.
• Press to select a highlighted item.
Select and press
•
You can print a wide variety of quality test labels to verify print and
media settings and print quality.
1 In the Ready screen, press
2 Press to select Tools and then press
with Test Labels selected.
Chapter 2 — Set Up the Printer
to continue to the next screen.
. The Main Menu appears.
. The Tools menu appears
55