F81866 Super Io Configuration; Serial Port Configuration - American Megatrends MB967 User Manual

BIOS SETUP
Device reset tine-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.

F81866 Super IO Configuration

Advanced
Main
Super IO Configuration
F81866 Super IO Chip
► Serial Port 0 Configuration
► Serial Port 1 Configuration
Power Failure
KB/MS Power On
LAN5,6 Bypass Function
LAN7,8 Bypass Function

Serial Port Configuration

Set Parameters of Serial Ports. User can Enable/Disable the serial port
and Select an optimal settings for the Super IO Device.
LAN5, 6 Bypass Function
LAN5, 6 Bypass Function Setting [Bypass] or [Normal]
LAN7, 8 Bypass Function
LAN7, 8 Bypass Function Setting [Bypass] or [Normal]
46
Aptio Setup Utility
Chipset Boot
F81866
[Always off]
[None]
[Bypass]
[Bypass]
MB967 User's Manual
Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit