F81866 Super Io Configuration; Serial Port Configuration - American Megatrends MI980 User Manual

BIOS SETUP
Device reset tine-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.

F81866 Super IO Configuration

Advanced
Main
Super IO Configuration
F81866 Super IO Chip
Standby Power on S5
► Serial Port 1 Configuration
► Serial Port 2 Configuration
► Serial Port 3 Configuration
► Serial Port 4 Configuration
► Serial Port 5 Configuration
► Serial Port 6 Configuration
Standby Power On S5
This configuration is supported only with MI980F.
[Enable]Provide the standby power for devices.
[Disabled] Shutdown the standby power.

Serial Port Configuration

Set Parameters of Serial Ports. User can Enable/Disable the serial port
and Select an optimal settings for the Super IO Device.
38
Aptio Setup Utility
Chipset Boot
F81866
All Enable
MI980 User's Manual
Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit