Easylink Setup - Philips HTS7200 User Manual

[Change PIN]
Sets or changes the password.
1) Press the Numeric buttons to enter the
password or your last set password. If you
forget the password, enter ' 0000 ', then press
OK .
2) Enter the new password.
3) Enter the same password again.
4) Move to [ConÀ rm] in the menu and press
OK .
[Display Panel]
Selects the brightness level of the front panel
display.
• [100%] - Brightest
• [70%] - Medium
• [40%] - Dimmest
[Auto Standby]
Turns off or turns on standby switching mode.
It is an energy saving feature.
• [On] - Switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
• [Off] - Disables auto standby mode.
[PBC]
Turns off or on the content menu of VCDs/
SVCDs with PBC (playback control) feature.
• [On] - Displays index menu when you
load a disc for play.
• [Off] - Skips the menu and start play
from the À rst title.
[Sleep Timer]
Switches to standby automatically after a
delay.
• [Off] – Disables the sleep timer.
• [15 Minutes] , [30 Minutes] , [45 Minutes] ,
[60 Minutes] – Selects a delay.
32 EN

EasyLink Setup

1
Press .
2
Select [Settings] , then press OK .
3
Select [EasyLink Setup] , then press .
Video Setup EasyLink
Audio Setup One Touch Play
Preference Setup One Touch Standby
EasyLink Setup
System Audio Control
Advanced Setup
Audio Input Mapping
4
Select an option, then press OK .
5
Select a setting, then press OK .
• To return to the previous menu,
press BACK .
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[EasyLink]
Your product supports Philips Easylink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
• [On] - Enables EasyLink features.
• [Off] - Disables EasyLink features.
[One Touch Play]
When you press PLAY on the remote control,
the TV (if supports one-touch play) and the
Home Theater System will be turned on. Disc
play starts if there is a disc in the Home Theater
System and the TV automatically switches to
the correct channel to show the video content.
• [On] - Enables one-touch play feature.
• [Off] - Disables one-touch play feature.
On
On
On
Off
.