Philips HTS7200 User Manual page 20

4
Read the on-screen instructions and
press OK to select [Continue] .
»
The Home Theater System scans and
displays the valid devices.
5
Press OK to select [Continue] .
Philips TV
Recorder
DVD player
6
Select a connected device on the left of
the menu, then press .
7
Select the connector that is used for the
device, then press OK .
»
Repeat steps 6~7 to map other
devices.
8
Press to exit the menu.
Update audio mapping from
connected devices
If you have already mapped audio from
connected devices, you can use this procedure
to update your mapping.
1
Press , select [Settings] , then press OK .
2
Select [EasyLink Setup] > [Audio Input
Mapping] , then press OK .
3
Select a connected device then press .
4
Select the connector that is used for the
device then press OK .
5
Repeat steps 4~5 to map other
connected devices.
18 EN
Aux1
Aux2
Coaxial
Optical