Table of Contents
Advertisement
Controls
Atomizing Cap
Trigger
Cup Lock
Air Flow Control
Figure 6. Controls.
-8
-
Pattern Control
Fluid Control
1.
Fluid Control: Controls the volume of
material that travels through the fluid
tip.
2.
Pattern Control: Adjusts the spray
pattern from a round pattern to a wide
fan. Not available on H3254.
3.
Air Flow Control: Controls the fluid
pressure inside the spray gun (H3255
only).
4.
Atomizing Cap: Controls the spray
pattern from vertical to horizontal.
5.
Trigger: Two stage trigger. Stage
one only releases compressed air for
blowing off the work piece. Stage two
sprays material.
Model H3253, H3254, H3255 Spray Gun
Advertisement
Table of Contents
