Lubrication - Grizzly H3256 Instruction Manual

Lubricate the following areas with a non-

Lubrication

silicon spray gun lubricant after cleaning.
A. Atomizing Cap Threads
B. Air Valve Packing
C. Trigger Pin
D. Air Flow Control Valve
E. Pattern Control
F. Fluid Control Knob
Allow the lubricant to coat threads, and run
F
into gun body to lubricate all moving parts
A
and seals.
E
B
C
D
Figure 15. Lubrication points.
-16 Model H3256/H3257 Spray Gun
-