Configuring a
MacIntosh when
DHCP is enabled
Figure 52: Select Manually from the Configure drop-down list
Follow the steps below to configure a DW6000 with DHCP enabled on a
MacIntosh system.
1. Select
System Preferences
Preference menu appears.
2. Select the
icon. The Network screen appears.
Network
3. Select the
Configure
4. Select
. Notice the
Using DHCP
5. Select the Apply Now button. The Mac is now configured.
Figure 53: Mac Systems Preferences menu
from the Mac interface. The Systems
drop-down list. See Figure 55.
field grays out.
IP Address
Network icon
Typical operating system settings
57