Akai S950 Operator's Manual page 77

You will note that these bandwidth figures are approximate. Of course, you
may require higher
instruments - it all depends entirely on the tone of the instrument you are
sampling. If it is bright, It may require a higher bandwidth than the one
recommended but if the sound is relatively mellow, you might like to try a
lower bandwidth setting. The best thing to do is experiment. Take e sample at
your seler,ted bandwidth and play it back from the MIDI controller comparing
it with the original. If it sounds at ail muffled, try a higher bandwidth but
if it sounds good, save that sample end try taking another at a lower
bandwidth to see if you can save even more memory. If the results of that
don't sound too good, recall the original.
Note: to save even more valuable memory in your 5950, don't forget the
DISCARD BEFORE START/AFTER END function on Page !0 of EDIT SAMPLE.
or lower bandwidths
64
than those shown for certain