Table of Contents
Advertisement
out resulting in a more consistent tonal change between keygroups. To switch
positional crossfade on, move the cursor to where it says OFF end press the
ON button.
Fig. 1 - Positional crossfade
You can now move to the next page using the 'page down' button. This will
display:
where # is the number of keygroups in the selected program and t is the
currently selected keygroup.
This page allows you to select a keygroup to edit as well as copy and delete
individual keygroups. It is also possible to insert a keygroup from another
program into the currently selected program using the GET function and you
can also place a keygroup from the currently selected program into another
program using the PUT function.
To select a keygroup, simply move the cursor to 'Select' by pressing the
'cursor >' button and if there is more than one keygroup in the program, you
can scroll through them using the CONTROL knob or you can select keygroups
with the keypad. You will note that it is possible for you to edit all
keygroups simultaneously when the display reads 'ALL' - this makes 'global'
editing of the program easier. For example, you may want to change the attack
time
of
all
the
separately, you can edit them en masse using the ALL selection.
>03 KEYGROUP: #Select ( 0 to #) ^
#Put- #Get_ #Copy (+>, Delete <->
keygroups
-
Instead
of
laboriously
34
editing
each
one
Hide quick links:
Advertisement
Table of Contents
