Akai S950 Operator's Manual page 7

CAUTION: UNDER NO CIRCUMSTANCES MUST YOU REMOVE THE DISK WHILE THE RED LIGHT
IS ON AS YOU MAY DAMAGE THE DISK OR THE DRIVE. NEITHER MUST YOU TURN THE
S950'S POWER OFF WHILST A DISK IS LOADING.
After the disk has loaded, you are ready to play your S950 so turn up the
volume on the amplifier and play a few notes on the keyboard - you should
now hear a sound. To see what other sounds are in the S950, simply turn the
grey CONTROL wheel anticlockwise to scroll through the programs. When you
want to change the sound, simply type in the appropriate number using the
blue keypad. Repent that process to select the other sounds.
Once you've heard all the programs on chat disk, you can select another disk
so turn the amplifier volume down, take out the first disk you put in by
pressing the push tab below the disk drive and switch the S950 off.
Now insert another disk as described above and turn the samplers power back
on. After 40 seconds of more clanking and whirring, turn up the amplifiers
volume because you are ready to listen to the sounds on the second disk
scrolling through the different programs using the data wheel as described
above and selecting different programs by typing in the relevant program
number. You can repeat this whole procedure for the remaining two disks.
5