Drolet SAHARA Owner's Manual page 21

2- Before you install the ceiling support, you need to frame the area.
3- To install the ceiling support, just slide the assembly into the framed opening from below.
Once you ensure that the finishing plate is flush with the underside of the ceiling and assembly
is level, secure it with screws.
4- Once the support is secure, you can begin to assemble the chimney by lowering the first
section into the support. Make sure that the male coupler is pointing upwards, as indicated by
the arrow on the chimney label.
5- Then, from beneath the support, insert the stove pipe adapter and twist-lock it into place.
21