Stamina AVARI Upright Bike Owner's Manual page 10

Meijer.com
ASSEMBLY INSTRUCTIONS
STEP 7
Run the CONNECTION WIRE(25) through the hole in the plate on the HANDLEBAR(5). Attach the
HANDLEBAR(5) to the UPRIGHT(4) with BUTTON HEAD BOLT(M8x1.25x30mm)(42) and ROUND HEAD
SCREWS(M6x1x8mm)(49).
STEP 8
Install two AA batteries into the METER(24), the batteries are not included. See page 13 for detailed battery
installation instructions. Plug the CONNECTION WIRE(25) into the METER(24), and push the excess wires
back into the UPRIGHT(4). Place the METER(24) on the plate on the HANDLEBAR(5) and secure with
ROUND HEAD SCREWS(M5x0.8x15mm)(48).
NOTE: Be careful not to damage the wires when attaching the METER(24) to the HANDLEBAR(5).
10