Security Setting; Power Setting - Nvidia EMAXX-MCP61D3-iCafe User Manual

nVIDIA MCP61 Series

4.5.6 Security Setting

Main Advanced
Security Settings
Supervisor Password : Not Installed
User Password
Change Supervisor Password
Change User Password
BIOS Sector Virus Protection
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
This item allows you to
characters, and press <Enter>. The password typed now will clear any previously entered
password from CMOS memory. You will be asked toconfirm the password. Type the password
again and press <Enter>.
Note: Don't forget your password. If you forget the password, you will have to
open the computer case and clear all information in the CMOS before you can start
up the system. But by doing this, you will have to reset all previously set options.
• Boot Sector Virus Protection
Uses this option, may prevent the change hard disk boot-sector (district table), thus prevents
the infection computer virus.

4.5.7 Power Setting

Main Advanced
Power Settings
► ACPI Configuration
► APM Configuration
► PC Health
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
► ACPI Configuration
Click <Enter> key to enter its submenu.
BIOS SETUP UTILITY
Boot Security
: Not Installed
[Disabled]
Chage Supervisor/User Password, Type the password, up to eight
BIOS SETUP UTILITY
Boot Security
- 2 -
Power JUSTw00T!
Install or Change the
password.
←
↑ ↓
Enter Change
F1
F10
ESC
Power JUSTw00T!
Section for Advanced
ACPI Configuration.
←
↑ ↓
Enter Go to Sub Screen
F1
F10
ESC
User's Manual
Exit
Select Screen
Select Item
General Help
Save and Exit
Exit
Exit
Select Screen
Select Item
General Help
Save and Exit
Exit