Trouble Shooting Schedule - Husqvarna Rider 15V2 Operator's Manual

TROUBLE SHOOTING SCHEDULE

Problem
Engine will not start.
Starter does not pull round engine.
Engine does not run smoothly.
Engine seems to have no power.
Engine overheats.
Battery does not charge.
Machine vibrates.
Uneven mowing.
Procedure
• Fuel tank empty.
• Spark plug defective.
• Spark plug connection defective.
• Dirt in carburettor or fuel pipe.
• Starter does not pull round engine.
• Battery flat.
• Bad contact between cable and battery terminal.
• Lift lever for cutting unit in wrong position.
• Main fuse blown. The fuse is placed in front of the
battery, under the battery cover.
• Ignition lock faulty.
• Gear shift/hydrostat pedal not in neutral.
• Hydrostat pedals not in the neutral position.
• Spark plug defective.
• Carburettor incorrectly set.
• Air filter clogged.
• Fuel tank vent blocked.
• Ignition setting defective.
• Dirt in carburettor or fuel pipe.
• Choking or incorrectly adjusted throttle cable.
• Air filter clogged.
• Spark plug defective.
• Dirt in carburettor or fuel pipe.
• Carburettor incorrectly set.
• Choking or incorrectly adjusted throttle cable.
• Engine overloaded.
• Air intake or cooling flanges blocked.
• Fan damaged.
• Too little or no oil in engine.
• Ignition defective.
• Spark plug defective.
• One or more cells faulty.
• Bad contact between battery terminals and cables.
• Blades are loose.
• Engine is loose.
• Imbalance on one or more blades, resulting from
damage or inferior balancing after sharpening.
• Blades blunt.
• Cutting unit skew.
• Long or wet grass.
• Grass blockage under hood.
• Different tyre pressures on right and left sides.
• Over-speeding.
• Drive belts slipping.
45
English –