Icom ID-31A Instruction Manual page 61

Uhf transceiver
Hide thumbs Also See for ID-31A:
Table of Contents

Advertisement

• While operating D-STAR
PROBLEM
After your call, the repeater
• The repeater setting is wrong.
does not transmit a reply.
• The transceiver is out of the repeater range, or
your transmission does not reach the repeater.
After your call, the repeater
• The call was successfully sent, but no station's
replies 'UR?' and its call
signal was immediately received.
sign.
After your call, the repeater
• MY call sign has not been set.
replies 'RX' or 'RPT?' and
• Your call sign has not been registered to the
the call sign of its gateway
D-STAR Server. Or it's wrong.
repeater.
• Your calling station call sign has not been regis-
tered to the D-STAR Server. Or it's wrong.
After your call, the repeater
• The D-STAR cannot connect to the called re-
replies 'RPT?' and call sign
peater, or it's busy.
of the called repeater.
After your call, the repeater
• The call sign of the called repeater is wrong.
replies 'RPT?' and its call
sign.
• The repeater list has been cleared.
Even holding down
, the
DR mode will not appear.
• The call sign has not been correctly received. • Try it again, after the transceiver has again received
Even holding down
, the
received call sign will not
set to the operating call
sign
The repeater does not ac-
• Your call sign has not been registered to the D-
cept your gateway call.
STAR system
POSSIBLE CAUSE
TROUBLESHOOTING
SOLUTION
• Set the correct repeater.
• Correct the repeater frequency, frequency offset, or
duplex setting.
• Try to access another repeater.
• Wait for a while, and try it again.
• Set the MY call sign.
• Register your call sign to the D-STAR Server. Or con-
firm the registration of your call sign.
• Ask the server's administrator about your calling sta-
tion's call sign.
• Wait for a while, and try it again.
• Correctly set the called repeater call sign.
• Reprogram the repeater list using the CS-31 clon-
ing software.
• Reprogram the repeater list with the transceiver.
its call sign.
• Ask your desired repeater's administrator about call
sign registration.
8
1
REF.
2
Advanced
3
Instruction
Section 3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Id-31e

Table of Contents