Table of Contents
Advertisement
Using this unit
Head unit
1 2
3 4
5 6
7 8
9
a
b
c
d
e
Part
Part
MULTI-CONTROL
1
SRC/OFF
8
(M.C.)
2
LEVER
9
/DISP
3
a
(list)
MIX/DISP OFF
4
b
Disc loading slot
/
(up/down)
AUX input jack
5
c
h (eject)
(3.5 mm stereo
jack)
6
CLOCK
d
Detach button
SD memory card
slot
Remove the front
7
BAND/
(iPod)
e
panel to access
the SD memory
card slot.
CAUTION
! Use a Pioneer USB cable when connecting a
USB storage device. Connecting a USB stor-
age device directly may be dangerous be-
cause it may stick out.
! Do not use unauthorized products.
Remote control
Remote controller buttons marked with the
same numbers as on the unit work in the same
way as the corresponding unit button, regard-
less of button name.
f
g
7
m
h
l
i
1
j
k
Part
Operation
Press to increase or decrease
f
VOLUME
volume.
Press to mute. Press again to
g
MUTE
unmute.
Press to perform manual seek
tuning, fast forward, reverse
h
and track search controls.
a/b/c/d
Also used for controlling func-
tions.
Press to select an audio func-
i
AUDIO
tion.
Press to select different dis-
j
DISP/SCRL
plays.
Using this unit
Part
Operation
Press to pause or resume play-
k
e
back.
FUNC-
l
Press to select functions.
TION
Press to display the list de-
LIST/
pending on the source.
m
ENTER
While in the operating menu,
press to control functions.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1
After installation of this unit, turn the
ignition switch to ON.
Set up appears.
2
Turn M.C. to switch to YES.
# If you do not use the unit for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3
Press M.C. to select.
4
Follow these steps to set the menu.
To proceed to the next menu option, you need to
confirm your selection.
Language select (multi-language)
1 Turn M.C. to select the desired language.
English—Español—Português
2 Press M.C. to confirm the selection.
Calendar (setting the date)
1 Turn M.C. to change the year.
2 Press M.C. to select day.
3 Turn M.C. to change the day.
4 Press M.C. to select month.
5 Turn M.C. to change the month.
6 Press M.C. to confirm the selection.
Clock (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM step (FM tuning step)
1 Turn M.C. to select the FM tuning step.
50kHz (50 kHz)—100kHz (100 kHz)
2 Press M.C. to confirm the selection.
AM step (AM tuning step)
1 Turn M.C. to select the AM tuning step.
9kHz (9 kHz)—10kHz (10 kHz)
2 Press M.C. to confirm the selection.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
2 Press M.C. to confirm the selection.
Quit appears.
5
To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6
Press M.C. to select.
Notes
! You can set up the menu options from the
system menu. For details about the settings,
refer to System menu on page 13.
Section
02
3
En
Advertisement
Table of Contents
