Grizzly G0583 Instruction Manual page 20

Be sure that you extend the bare copper wire
down all branches of the system. Do not forget
to connect the wires to each other with wire nuts
when two branches meet at a "Y" or "T" connec-
tion.
Ensure that the entire system is grounded. If
using plastic blast gates to direct air flow, the
grounding wire must be jumped (Figure 14)
around the blast gate without interruption to the
grounding system.
Plastic Blast Gate
Metal Duct
Copper Ground Wire
Figure 14. Ground jumper wire when using
plastic blast gates or elbows and metal duct.
-18- G0583 1 HP Canister Dust Collector